CH341A Series Burner Chip Programmer

The CH341A series burner chip programmer is a low-cost mini USBEEPROM Flash BIOS USB Programmer that was built and designed to support24 EEPROM and 25 SPI flash 8pin/16 pin chip. ThisCH341A series programmer is integrated with a powerfulCH341A chip that has the ability ro automatically recognize25 series chip. This CH341A EEPROMUSB programmer is equipped with a indicator lamp that helps the user understand working status of the USB programmer.

You will require ComboTool app for performing:

1. Writing & Executing JAVAScript in Android device and performing I/O directly.
2. Plugin IR_Temper Sensor => Combotool change to be a temperature meter.
3. Plugin RS485 Converter =>It can capture/send RS485 Modbus frame.
4. Plugin => It can be a UV meter.

Types of modes used in theCH341A EEPROMUSB programmer:

• UART Mode:The UART mode in theCH341A series USB programmer provides a different control signal rate such asserial transfer enable, serial receive in ready. This mode provides theCH341A USB programmer withcommon MODEM communication signal in order to expand UART forcomputer.
• Printer Port Mode: The standard printer port in the CH341AEEPROM programmercompounds USB relevant protocol and Windows operating system used to upgrade ordinary parallel printer to USB bus directly.
• Parallel Mode: The CH341A USb programmer provides8-bit parallel in EPP or MEM mode which can be usedto input/output data directly without MCU/DSP.

How do you program a BIOS CH341A chip?

• You need to first reboot your computer since you need to outside of your normal operating system while entering the BIOS utility.
• Pay attention to the screen as your computer loads up to press the indicated keyduring the startup messages to enter the BIOS.
• Navigate through the BIOS menu screens, using the arrow keys.
• Highlight the setting to be reprogrammed with the arrow keys and press “Enter”. This will display a list of valid settings for the particular option. Highlight the option that you wish to select and press “Enter” again.
• Exit BIOS when done making your changes by pressing the “Esc” key. Press “Y” to save and confirm your changes.